Skip to content
pack posters in a document tube

How to Pack Several Posters in a Document Tube

Measure the combined roll before putting several posters into one adjustable tube. Leave enough room to insert and remove it, and use suitable interleaving when the artwork needs surface protection.

Check that every sheet is suitable for rolling

Before combining posters, check how the printer or artist recommends transporting them. Paper thickness, a coating, fresh ink or a raised surface can affect whether rolling is appropriate. Keep delicate originals or work intended to remain flat in the transport format their creator recommends.

For ordinary posters that can be rolled, let any printed or applied finish become ready for handling according to its instructions. Place the sheets on a clean table where their edges can stay supported. Clear grit, clips and other objects that could press into the paper.

Measure the longest edge that will run along the tube

Choose the rolling direction for each poster and measure the length of the finished roll. If you group different sizes, the longest sheet in that orientation determines how much internal length you need. Keep the outer edges aligned enough that one projecting corner cannot catch the cap.

The DEWEL document tube sold by SEISSO adjusts from 24.5 to 40 inches in its listed external length range. Check the usable internal space and closure clearance for your roll. An outer measurement alone does not tell you how much room remains below the closed cap.

Build a loose test roll on the table

Start with a small group and roll gently, following the handling directions for the sheets. Keep the curl gradual and avoid pressing a sharp crease into the leading edge. Check that the smaller sheets remain in the roll instead of slipping toward one end.

Measure the outside diameter of the combined roll without squeezing it smaller. Compare that with the tube’s usable opening. You need enough clearance to move the roll in and out without scraping the edges or relying on force to compress it.

Protect surfaces with appropriate interleaving

If a poster’s finish needs protection, choose an interleaving material recommended for that paper or print process. Let it cover the areas that would touch another sheet. Check that a loose protective edge will not bunch up when the roll enters the tube.

Keep the package easy to identify from the outside with a separate note. If the artwork itself needs a particular face inward or outward, follow its maker’s directions. There is no single rolling orientation that suits every print surface.

Set the tube length before inserting the posters

Adjust the tube and engage its lock as directed before putting the roll inside. Check the interior and cap for loose debris. Support the tube and the roll together so the paper cannot fall abruptly against the bottom.

Slide the group in gently and stop if it catches. Pull it back out and check the diameter, projecting corners and interleaving. A roll that needs a firm push can be difficult to retrieve and may suffer edge damage while you remove it.

Leave room for the cap and an easy removal

Close the cap without pressing it against the poster edges. If the roll reaches into the closure, use a longer supported setting or reduce the group. Keep any internal packing compatible with the artwork and avoid pushing material tightly into the ends.

Before leaving, practice taking the roll out once over the clean table. Support the free end as it emerges. If the center sheets stay behind, unroll the group carefully and try a smaller bundle that is easier to handle as one unit.

Carry the tube with its contents in mind

Check the closure and carrying strap before lifting the tube. Allow enough room around it when turning through a doorway or placing it beside a seat. Keep it where it cannot roll away or be crushed under luggage.

At your destination, remove and unpack the sheets in a clean space according to their handling guidance. Keep the tube for transport as intended. Check with the print maker about suitable long-term storage if you plan to leave the posters rolled for an extended period.

Frequently Asked Questions

How many posters can I put in one tube?

Measure the diameter and length of the combined roll. Paper weight and protective material can change the number that fits comfortably.

Can I tighten a roll to make it fit?

Use a tube with enough clearance for a gentle roll. Check the artwork’s handling guidance before making the curl smaller.

Should different-sized posters go together?

They can share a tube if each can be rolled and the smaller sheets stay supported. Test removal on a table before transport.

Can I use this carrying tube as a shipping package?

Check the tube maker’s instructions and the carrier’s packaging requirements for the exact shipment.

Explore the products